Did you remember to add seam allowances?

 Lollllllllllll nope 🙃

But it doesn't matter, because I still made pants, even if they tore down the center front when I put them on.  And I can still use them to explain the process of creating them.

I had to screen cap myself from yesterday's video because there were no photos of me in the pants.

MEASUREMENTS

Starting from last month's diagram, I created my own. Depending on what Haithabu article you read, some say that the pants only go down to the knee, and others that they go down to the ankle.  I personally find it more logical to make full length pants that can be zhuzhed up to the knee or left long depending on the weather, so I am going to use the length from waist to ankle for measurement #7.  Measurement #5 is going to be based on the largest circumference (waist or butt) since these pants have no give and need to be pulled up over all your lower topographies.  Because I find 3:1 pleating the simplest, #5 was 3 times the circumference of my butt, divided by 2 (because it is split over both legs).

 The height of B + C is going to be the measurement of your crotch, from bellybutton to top of crack. Add an inch or two depending on how roomy you want them to be.  After that, divide that length by 3.  B will be twice the length of C, and radius of chunk 1 cut out of piece A.  PLUS SEAM ALLOWANCES. DON'T FORGET THE SEAM ALLOWANCES!

Circumference  = pi x diameter = pi x 2 x radius
Circ 1 / (2 pi) = radius 1

 Under that, you go down 3" and you remove radius 9 and cut vertically down from there.

radius 1 + 3"= circumference 9 + height C

height 7 = height 8 + circumference 9 + height C

The radius of curve 1 plus 3" will be equal to the height of C plus the path cut out by curve 9, so that when you add height C plus curve 9 to straight 8, it will be the same distance as height 7.

Now that you have the height of B and C, you need to calculate the width.  The top of B is half the width of the bottom of B.  The top of C is the bottom of B + 6".  The bottom of C (length 4) is half the top of C, which is also the top of B + 3.  I'm going to need to make better diagrams for this...

  

Here you can see piece A at the top, piece B eased into curve 1, and piece C lined up with the bottom of B and the 3" of A. 

 

D is the waist band, that will be the length of your butt circumference and 6" tall so that when you fold it over, you get a 2-3" waist band. 

E are the two calf bands. These I made 9" tall so that they would show 4" long after sewing in and folding in half, and would have enough length to be trapped with the winnegas.

SEWING TOGETHER

1) Sew B into the crotch of A, making sure to ease the fabric.  Do this for both legs.

2) Sew top of C to bottom of B + both 3" of A

3) Sew vertical 7 to vertical 8 + curve 9 of the same leg. 

4) Pleat bottom of A to top of calf E.  Fold over and encase edges.

5) Pleat top of A and B into waste band D.  Fold over and encase edges.

As per several articles, you can choose to add 5 or 6 belt loops to the waste band, especially if you have a greater discrepancy between your waist and your butt.

The striped fabric really helps to show on the back of the pants how C in the center and B down the bottom meet up with A.

Ultimately, I forgot to add seam allowance, I used my waist measurement instead of my butt measurement, and I split the fabric down the front when I put them on -_____-

asdfasf

But I'm glad I did this with the $25 slinky fabric that was impossible to work with and I ended up hating and not the linen!  At least I was able to wear a tunic over them and hold them together with a safety pin for the day. I will give it credit in that the stripes made pleating without having to measure the only plus.